4-12 Control Functions
from 4WD to 2WD, stop the vehicle, be sure
the select lever is set to position ⓐ, and
then set the switch to “2WD”.
On-Command differential gear lock
switch “4WD”/”LOCK”
1. On-Command differential gear lock switch “4WD”/ “LOCK”
2. Select lever
To lock the differential gear in 4WD, stop the
vehicle, make sure the On-Command
four-wheel-drive switch is set to “4WD”,move
the select lever to position ⓑ,and then set
the switch to “LOCK”. When the differential
gear is locked, the differential gear lock
indicator light will come on along with the
differential gear lock indicator in the
multifunction meter unit display .To release
the differential gear lock , stop the vehicle
and set the switch to “4WD”.
To Next Page
Loading...
Need help?
General