Control Functions 4-9
code returns again. Only after the fault is
fixed, will the time show automatically.
The descriptions for the fault codes are
shown in Chapter 11 of this manual.
Fuel level indicator
The fuel level display will indicate the fuel
volume. When the fuel is getting low the fuel
pump symbol will flash.
1. Fuel level indicator 2. Fuel level warning indicator
Switches
1. Light switch “OFF/ / ”
Light switch “OFF/ / ”
Set the switch to “
”to turn on the low
beam and the taillights.
Set the switch to “
”to turn on the high
beam and the taillights.
Set the switch to “OFF” to turn off all the
lights.
To Next Page
Loading...
Need help?
General