Pre-Operation Checks 5-10
2. Lightly turn the steering wheel left and
right.
3. There should be 0.8″-1.0″ (20-25 mm)
of freeplay.
If there is excessive freeplay or strange
noises, or the steering feels rough or
″catchy,″ have the steering system
inspected by an authorized service center.
Seat belts
Make sure that both seat belts are not frayed
or damaged.
The seat belt must move smoothly when
pulled out and retract on its own when
released. The latch plate should click
securely into the buckle and release when
the release button is pushed firmly. Wash off
any dirt or mud which could affect operation.
Have a service center repair as necessary
for proper operation.
Fittings and fasteners
Always check the tightness of chassis fittings
and fasteners before a ride. Take the vehicle
to a dealer or refer to the Service Manual for
correct tightening torque.
Lights
Check the headlights and tail/brake lights to
make sure they are in working condition.
Repair as necessary for proper operation.
Switches
Check the operation of all switches. Have a
service center repair as necessary for proper
operation.
To Next Page
Loading...
Need help?
General