Cub Cadet CS5018

22
ENGINE*
*All specifications are based on the latest product information available at the time of printing. We reserve the right to
make changes at any time without notice.
Engine Type.......................................................................................................................................... Air-Cooled, 2-Cycle
Displacement ......................................................................................................................................................... 51.7 cm
3
Power........................................................................................................................................................................ 2.5 kW
Clutch Type ......................................................................................................................................................... Centrifugal
Minimum RPM (no load RPM with bar and chain) .................................................................................... 2700 ± 200 min
–1
Maximum RPM (no load RPM with bar and chain) ............................................................................. 12500 - 13000 min
–1
Ignition Type.......................................................................................................................................................... Electronic
Ignition Switch ............................................................................................................................................... Rocker Switch
Spark Plug Gap ......................................................................................................................................... 0.02 in. (0.5 mm)
Lubrication................................................................................................................................................... Fuel/Oil Mixture
Fuel/Oil Ratio.................................................................................................................................................................. 50:1
Carburetor....................................................................................................................................... Diaphragm, All-Position
Number of Pinion Teeth ...................................................................................................................................................... 7
Approximate Unit Weight (without bar and chain)......................................................................................................... 5 Kg
Anti-vibration System ..................................................................................................................................................... Yes
Inertial Chain Brake ........................................................................................................................................................ Yes
Decompression Valve .................................................................................................................................................... Yes
Specifications
Section 11
OTHER SPECIFICATIONS*