Cub Cadet Double Bagger

To Next Page

CONTENTS OF CARTON

42”/46” Double Bagger

Before beginning installation, remove all parts from the carton to make sure

everything is present. Carton contents are listed below and shown in Figure 1. The

hardware pack(s) included in this kit are detailed at the end of this section.

• Boot Assembly - 731-09329A

• Grass Bag Assembly (2) - 664-05104

• Vertical Bagger Support - 683-04519C

• Grass Bag Support - 683-05329A

• End Plugs (4) - 735-0246A (pre-installed)

• Bagger Cover - 631-05474B

• Bagger Vent Wall Assembly - 631-05491B

• Bagger Cover Left Side Wall - 731-12350B

• Hose - 764-05082

• Lower Hose Connection - 731-12353A (pre-installed)

• Hinge Pin - 711-06701

• Adapter Bracket - 789-02518

• Hitch Adapter Bracket - 789-02298

• RZT Bagger Weight - 719-04271A

• Weight Plates (3) - 789-02137

• Weight Hanger Bracket Left - 789-02197

• Weight Hanger Bracket Right - 789-02198

• Hardware Pack - 689-01419

• Anti-marking Adhesive Strips - 777X52246

• Bagger Boot Hardware Pack - 689-00636

50”/54” Double Bagger

Before beginning installation, remove all parts from the carton to make sure

everything is present. Carton contents are listed below and shown in Figure 2. The

hardware pack(s) included in this kit are detailed at the end of this section.

• Boot Assembly - 631-05103

• Grass Bag Assembly (2) - 664-05104

• Vertical Bagger Support - 683-04519C

• Grass Bag Support - 683-05329A

• Chute Adapter - 731-10133

• End Plugs (4) - 735-0246A (pre-installed)

• Bagger Cover - 631-05474B

• Bagger Vent Wall Assembly - 631-05491B

• Bagger Cover Left Side Wall - 731-12350B

• Hose - 764-05135

• Lower Hose Connection - 731-12353A (pre-installed)

• Hinge Pin - 711-06701

• Adapter Bracket - 789-02518

• Hitch Adapter Bracket - 789-02298

• RZT Bagger Weight - 719-04271A

• Weight Plates (3) - 789-02137

• Weight Hanger Bracket Left - 789-02197

• Weight Hanger Bracket Right - 789-02198

• Hardware Pack - 689-01419

• Anti-marking Adhesive Strips - 777X52246

• Bagger Boot Hardware Pack - 689-02199

Figure 1

Figure 2

Thank You

Thank you for purchasing a bagging attachment. It was carefully engineered to provide excellent performance when properly operated and maintained.

Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your equipment. Please be sure that you, and any other persons who will

operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage.

All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the equipment, its features and

operation. Please be aware that this Operator’s Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be

applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation.

If you have any problems or questions concerning this equipment, phone your local dealer or contact us directly. We want to ensure your complete satisfaction at all times.