To Next PageTo Next Page
Need help?Do you have a question about the Cub Cadet ENDURO XT Series and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Turning Radius | 16 inches |
| Deck Material | 12-gauge steel |
| Engine | Kohler 7000 Series |
| Speed | 5.5 mph forward |
| Warranty | 3-year |
Details on safe handling and servicing of the lithium-ion battery system.
Essential guidelines for understanding and operating the tractor safely.
Instructions and precautions for operating the tractor safely.
Steps to take before starting the tractor to ensure a safe operation.
Safety instructions regarding children and tractor operation.
Guidelines and warnings for operating the tractor on slopes.
Procedures and precautions for hauling equipment with the tractor.
Limits and safety rules for towing loads with the tractor.
Basic service and maintenance guidelines for safety.
Safety precautions related to electrical components and power.
Important safety instructions for using the battery charger.
Critical safety information for handling and using the tractor's battery.
Explanation and meaning of safety symbols found on the tractor.
Steps to take before beginning tractor assembly.
Instructions for installing the tractor's seat assembly.
Guide to installing the chute deflector on the cutting deck.
Steps for attaching the screw-on hood topper to the tractor.
Instructions for installing the snap-on hood topper.
Guide for installing the dash cap onto the tractor.
Steps for installing the tractor's steering wheel.
Instructions on how to adjust the operator's seat position.
Procedure for checking and setting the correct tire pressure.
Guide to adjusting the deck wheels for anti-scalping.
Instructions and warnings for charging the tractor's battery.
Recommendations for optimal battery charging and maintenance.
Overview of the Vehicle Control Module and its functions.
Explanation of the safety system preventing operation without proper conditions.
Steps to properly engage and disengage the parking brake.
How to adjust the cutting deck to the desired mowing height.
Procedures for safely starting the tractor.
Instructions on how to safely stop the tractor.
Guidelines for operating the tractor's drive pedals and movement.
How to operate the tractor in reverse with the blade engaged safely.
Instructions for engaging and disengaging the Power Take-Off (PTO).
Tips and precautions for effective and safe mowing.
Procedures for maintaining the tractor after each use.
How to clean the cutting deck's underside.
General instructions for cleaning the tractor body.
Guidelines for lubricating key tractor components.
Lubrication instructions for the front wheel axles and rims.
Lubrication instructions for the deck wheels.
Lubrication instructions for pivot points and linkage systems.
General safety precautions and notes before making adjustments.
Instructions for adjusting the cutting deck for optimal performance.
How to adjust the deck for side-to-side leveling.
Steps to adjust the overall cutting deck height.
Instructions for adjusting the anti-scalp deck wheels.
Procedures for adjusting the operator's seat.
Information on when and how to adjust the parking brake.
How to ensure the tractor's neutral setting is properly adjusted.
Steps to check and correct front wheel alignment.
Instructions for safely removing the cutting deck.
Instructions for reinstalling the cutting deck.
Safety precautions and inspection for the cutting blade(s).
Guide on how to sharpen or replace the tractor's blades.
Instructions for storing the tractor during the off-season.
Precautions and guidelines for storing the tractor properly.
Steps to take when taking the tractor out of storage.
Recommendations for storing the battery to maintain its health.
Important safety and environmental guidelines for battery disposal.
Explains common messages displayed on the tractor's LCD screen.
Lists and explains diagnostic fault codes and their meaning.
