To Next PageTo Next PageWhy is my Cub Cadet XT2 Enduro Tractor cutting unevenly?
An uneven cut on your Cub Cadet Tractor may be due to several reasons. First, the deck might not be leveled correctly; perform a side-to-side deck adjustment. Second, the blade may be dull or damaged; sharpen or replace it. Finally, check and correct the tire pressure in all four tires, as uneven tire pressure can also cause an uneven cut.
What to do if my Cub Cadet XT2 Enduro has excessive vibration?
Excessive vibration in your Cub Cadet Tractor can be caused by a loose cutting blade. If this is the case, tighten the blade and spindle. It can also be caused by a damaged, unbalanced, or bent cutting blade, in which case you should replace the blade.
General| Transmission | Hydrostatic |
|---|---|
| Type | Lawn Tractor |
| Fuel Type | Gasoline |
| Fuel Capacity | 3.0 U.S. gal (11.4 L) |
| Warranty | 3-year limited |
| Drive System | 2WD |
| Cutting Height | 1-4 inches |
| Number of Blades | 2 |
| Front Tire Size | 15x6.00-6 |
| Rear Tire Size | 20 x 8-8 |
| Engine | Kohler |
| Cutting Width | 42 inches |
Expresses gratitude for purchasing the tractor and emphasizes the importance of reading the manual.
Instructions on locating and recording the model and serial number for future reference and support.
Guidance on registering the product and seeking assistance through website, videos, or phone.
Outlines fundamental safety rules and precautions for operating the tractor safely.
Provides critical safety guidelines and precautions for operating the tractor on sloped terrain.
Details safety measures and restrictions regarding children operating or being near the tractor.
Offers safety recommendations and precautions when towing equipment with the tractor.
Instructions for safe handling, storage, and refueling of gasoline to prevent fire hazards.
Covers general service points, engine exhaust safety, and pre-operation checks.
Addresses engine modifications, emissions compliance, and spark arrestor requirements.
