To Next PageTo Next Page
Need help?Do you have a question about the Cub Cadet XT1-LT42 and is the answer not in the manual?
General| Horsepower | 18 HP |
|---|---|
| Cutting Width | 42 inches |
| Transmission | Hydrostatic |
| Turning Radius | 18 inches |
| Cylinders | 1 |
| Blades | 2 |
| Deck Material | 13-gauge steel |
| Front Tires | 15x6 inches |
| Rear Tires | 20x8 inches |
| Warranty | 3-year limited |
| Engine Type | Single-cylinder OHV |
| Drive System | Rear wheel drive |
| Cutting Height | 1-4 inches |
| Fuel Capacity | 3 gallons |
Expresses gratitude for purchasing the tractor and emphasizes reading the manual for safe operation.
Instructions to locate and record tractor model and serial number for technical support and warranty.
Provides resources for product registration, support contact numbers, and website access.
Provides essential safety rules for operating the tractor and general precautions for user protection.
Details critical safety guidelines for operating the tractor on slopes to prevent tip-overs and accidents.
Outlines precautions for safely handling gasoline to prevent fires, explosions, and personal injury.
Covers essential safety measures before performing any maintenance or repairs on the tractor.
Explains the meaning of various safety symbols found on the tractor and in the manual for user awareness.
Lists items included in the crate and initial steps for preparing the tractor for use, including manual movement.
Guides on installing the operator seat, hood topper, dash cap, and front bumper onto the tractor.
Instructions for correctly connecting battery cables and checking tire pressure for safe operation.
Explains the function and operation of the forward drive, reverse drive, brake pedals, and seat adjustment.
Describes throttle control, deck lift lever, and PTO engagement for electric/manual systems.
Details on engaging the parking brake and setting cruise control for maintaining consistent speed.
Step-by-step guide for safely starting, stopping, and using the reverse caution mode with blades engaged.
Guidance on driving, including smooth operation, turning, and critical safety measures on slopes.
Instructions for engaging the parking brake and setting cruise control for maintaining a desired speed.
Steps for engaging and disengaging the Power Take-Off (PTO) for electric and manual tractor models.
Guidance on mowing patterns, slope management, and preparing the mowing area for safe operation.
A detailed schedule outlining required maintenance checks based on usage hours and time intervals for the tractor.
Comprehensive instructions for changing engine oil and proper battery cable management and care.
Instructions for using the Smart Jet system for deck cleaning and lubricating key tractor points.
Procedures for adjusting the deck to ensure proper side-to-side levelness and desired cutting height.
Procedures for aligning tractor wheels and adjusting the parking brake if performance issues arise.
Guidelines for preparing and storing the tractor properly for extended periods of non-use.
Information on battery service, fuse checks, and safety switches within the tractor's electrical system.
Detailed, step-by-step instructions for safely removing the cutting deck from the tractor.
Instructions for removing, sharpening, balancing, and replacing cutting blades for optimal performance.
Steps for safely removing and replacing the mower deck belt to ensure proper function.
Guidance on replacing the tractor's transmission drive belt, noting potential need for dealer service.
Identifies common causes of excessive vibration and provides remedies for correction.
Explains common causes of uneven cuts and offers solutions for achieving a level cut.
Lists part numbers for deck belts, blades, spindle, and wheels for ordering replacements.
Lists part numbers for battery, gas cap, throttle control cable, air filter, and oil filter.
Lists part numbers for ignition key, discharge chute, wheels, spark plug, and other essential components.
Lists available attachments like baggers, mulch kits, snow throwers, and cabs for enhanced functionality.
Lists accessories such as tire chains, weight kits, tractor covers, and specialized tools for maintenance.
Explains owner responsibilities and coverage details for the emission control system warranty.
Outlines general warranty terms, coverage, exclusions, and service procedures for US and Canadian customers.
