EasyManua.ls Logo

Cub Cadet XT2 Enduro - Maintenance & Adjustment

Cub Cadet XT2 Enduro
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance & Adjustments
6
21
Maintenance Schedule
Before
Each use
After First
5 Hours
Every 10
Hours
Every 25
Hours
Every 50
Hours
Every 100
Hours
Prior to
Storing
See
Engine
Manual
Check & Clean Engine Cooling Fans for Debris
P P
Check Engine Oil Level
P
Check Air Filter for Dirty, Loose or Damaged Parts
P
Clean Battery Terminals
P P
Grease All Lubrication Points
P P
Clean Hood/Dash Panel Louvers
P P
Check Intake Screen/Clean as Needed
P P
Check Blades/Sharpen or Replace as Needed
P P
Check Tire Pressure
P P
Check/Clean Top & Underside of Deck
P
Inspect & Lube Deck Wheels
P P
Check Deck Level/Pitch
P P
Check Belts & Pulleys for Damage/Wear
P
Check That All Hardware is in Place & Secure
P
Check Spark Plug Condition & Gap
P P P
Engine Break-In Oil Change
P P
Change Engine Oil
P P P
Replace Oil Filter
P P P
Clean or Change Air Filter
P P
Replace Fuel Filter
P P
Have Valve Lash Checked & Adjusted *
P
* -- Have this item performed by an authorized service dealer

Related product manuals