To Next PageTo Next Page
Need help?Do you have a question about the Cub Cadet GT2523 and is the answer not in the manual?
General| Cylinders | 2 |
|---|---|
| Transmission | Hydrostatic |
| Drive | 2WD |
| Axles | 2 |
| Deck Material | Steel |
| Turning Radius | 18 inches |
| Seat Type | High-back |
| Engine | Kohler Command V-Twin OHV |
| Engine Type | V-Twin OHV |
| Fuel Capacity | 4 gallons |
| Warranty | 3 years |
Outlines owner's duties for maintaining the engine and meeting warranty terms.
Details parts covered and duration for Federal and California emission control systems.
Lists conditions and situations not covered by the emission control system warranty.
Specifies owner's responsibility for maintenance and authorized service for repairs.
Instructions for connecting the tractor's battery cables after uncrating.
Key safety rules for operating the lawn mower and avoiding injury.
Guidelines and warnings for operating the tractor safely on slopes.
Instructions to ensure children's safety during operation.
Safety procedures for handling fuel, performing maintenance, and disposing of materials.
Explains safety decals and their locations on the tractor for safe operation.
Step-by-step instructions for starting and stopping the tractor engine.
Importance of the manual and how to contact Cub Cadet for service or information.
Guide on identifying and recording tractor model and serial numbers for service.
Identifies and describes dashboard controls like oil indicator, hour meter, ignition switch.
Details tractor controls such as brake pedal, control pedals, lift handle, and seat adjustment.
Details the brake pedal lock and cruise control lever functions.
Explains the lift handle, seat adjustment, and transmission release lever.
Instructions on accessing the engine compartment by removing hood and side panels.
Essential checks before starting the tractor, including controls and fluid levels.
Procedures and safety warnings for starting the tractor engine.
Proper procedures for shutting down the tractor engine and securing it.
Precautions and techniques for safely operating the tractor on inclines.
Instructions on how to adjust the tractor seat for optimal comfort and control.
Procedures for checking and adjusting the tractor's braking system.
How to check and adjust the pivot axle for play and binding.
How to adjust spring tension for the implement lift handle.
How to adjust the engine's idle speed for optimal performance.
Instructions on how to check the engine oil level using the dipstick.
Procedure for draining engine oil and replacing the oil filter.
Information on replacing the hydrostatic transmission oil filter.
Procedures for cleaning the engine to prevent overheating.
How to inspect, gap, and replace the spark plug.
Guidelines for inspecting and replacing the inline fuel filter.
Steps for replacing the tractor's headlight bulbs.
Recommended steps for storing the tractor battery during off-season.
Proper tire inflation pressures and safety for mounting tires on the rim.
Step-by-step guide for attaching the mower deck to the tractor.
How to adjust the mower deck for levelness from side to side.
Instructions for cleaning, sharpening, balancing, and replacing mower blades.
Lubrication points for spindle assemblies and idler arms.
Steps to prepare the fuel system for long-term storage.
Procedures for preparing the engine and overall tractor for storage.
Safety warnings and tips for effective mowing and avoiding streaking.
Guidelines for effective mulching, including cutting wet grass and length.
Diagnoses and remedies for hard starting and irregular engine operation.
Troubleshooting PTO clutch engagement and low voltage problems.
Specific instructions for lubricating various tractor components at different intervals.
