Cub Cadet GTX 1054 User Manual


surface. See Fig. 6-2.
Turn the water on.4.
5.
the engine and place the throttle lever in the FAST (rabbit)
position.
6.
7.
engaged for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly rinse.
8.
position.
9.

Turn the water off and detach the hose coupler from the 

 
cutting deck.


running for a minimum of two minutes, allowing the underside
of the cutting deck to thoroughly dry.
Lubrication
WARNING! Before lubricating, repairing, or

parking brake, stop engine and remove key to
prevent unintended starting.
Front Wheels
Each of the front wheel axles and rims is equipped with a

grease applied with a grease gun after every 25 hours of tractor
operation.
Pivot Points & Linkage
Lubricate all the pivot points on the drive system, parking brake
and lift linkage at least once a season with light oil.
Deck Wheels

a grease fitting. Lubricate with a No. 2 multi-purpose grease
applied with a grease gun after every 25 hours of tractor
operation.
Figure 6-2
Figure 6-3
21se c t i O n 6 — Ma i n t e n a n c e & ad j u s t M e n t s

Cub Cadet GTX 1054 Specifications

General

Engine Displacement	725 cc
Cutting Width	54 inches
Transmission	Hydrostatic
Deck Material	12-gauge steel
Deck Engagement	Electric PTO
Engine Size	725 cc
Horsepower	24 HP
Deck Size	54 inches
Blades	3
Turning Radius	16 inches
Engine Power	24 HP
Warranty	3-year limited
Front Tires	16 x 6.5 x 8