Cub Cadet i1046, i1050 User Manual

28
MaiNTENaNcE SchEdulE
Before
Each Use
Every 10
Hours
Every 25
Hours
Every 50
Hours
Every 100
Hours
Prior to
Storing
Check Engine Oil Level
Check Air Cleaner
Check Engine Air Intake
Areas & Clean as Needed
Clean and Re-oil Air Filter’s
Foam Precleaner
Check Air Cleaner Paper Ele-
ment & Clean as Needed
Replace Air Cleaner Paper
Element & Precleaner
Change Engine Oil & Filter
Check Spark Plugs
Clean Engine Cooling Fins
Change Fuel Filter
Lube Mid Steering Arms,
Pivot Shafts, and Axles
Lube Front Wheel Bearings
Lube Deck Spindles
Lube Deck Idler Arm - 50"
Deck ONLY
Lube Deck Front Ball Wheels
Use Deck Wash System to
Clean Underside of Deck
Lubricate All Pedal and Lift
Pivot Points With Light Oil
Clean Battery Terminals
Clean Hood Louvers
IMPORTANT: Check air cleaner components more often if operating in extremely dirty, dusty conditions, and sevice as
necessary.
6
Maintaining
Your Tractor
IMPORTANT
IMPORTANT: Failure
to perform the sched-
uled maintenance may
void your warranty.

Cub Cadet i1046, i1050 Specifications

General

Transmission	Hydrostatic
Number of Blades i1046	2
Blade Engagement	Electric PTO
Deck Material	12-gauge steel
Engine Type	4-Cycle
Drive	Rear-wheel drive
Cutting Width i1046	46 inches
Cutting Width i1050	50 inches
Turning Radius	18 inches
Front Tires	15 x 6 in.