EasyManuals Logo

Cub Cadet i1050 User Manual

Cub Cadet i1050
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28 se c t i O n 7— se r v i c e
If emptying the fuel system:2.
Do not drain fuel when the engine is hot. Allow the a.
engine adequate time to cool. Drain fuel into an
approved container outdoors, away from open
flame.
Drain any large volume of fuel from the tank by b.
disconnecting the fuel line from the in-line fuel filter
near the engine.
Reconnect the fuel line and run the engine until it starts c.
to falter, then use the choke to keep the engine
running until all fuel in the carburetor has been
exhausted.
Again disconnect the fuel line and drain any remaining d.
gasoline from the system.
WARNING! Drain fuel only into an approved
container outdoors, away from an open flame. Allow
engine to cool. Extinguish cigarettes, cigars, pipes,
and other sources of ignition prior to draining fuel.
Remove the spark plug and pour one (1) ounce of engine oil
through the spark plug hole into the cylinder. Crank the engine
several times to distribute the oil. Replace the spark plug.
Before storing for an extended period, clean and lubricate the
tractor as instructed in “Maintenance and Adjustments” section.

Other manuals for Cub Cadet i1050

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet i1050 and is the answer not in the manual?

Cub Cadet i1050 Specifications

General IconGeneral
Cutting Width50 inches
TransmissionHydrostatic
Cutting Height1.5 - 4 inches
Blades3
Weight580 lbs
Warranty3-year limited
Deck MaterialSteel
EngineKohler Courage

Related product manuals