EasyManuals Logo

Cub Cadet LT1040 User Manual

Cub Cadet LT1040
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32
SECTION 14: SPECIFICATIONS*
* Cub Cadet reserves the right to change product specifications, design, and standard equipment without notice and without incurring obligation
** Kohler’s horsepower ratings exceed Society of Automotive Engineers Small Engine Test Code J1940. Actual engine horsepower is lower and affected
by, but not limited to, accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed and ambient operating conditions
(temperature, humidity, and altitude).
LT1040
Capacities
Fuel Tank 11.4 liters (3.0 gallons)
Engine Crankcase (w/ filter) 1.5 liters (50.75 oz.)
Constant Velocity Transmission
Forward Speed 0 m.p.h. - 5.2 m.p.h.
Reverse Speed 0 m.p.h. - 2.3 m.p.h.
Engine (Air-cooled, 4-cycle)
Make Kohler Courage
Model SV540
Cylinders Single
Bore 89 mm (3.50 in.)
Stroke 86 mm (3.38 in.)
Displacement 535 cc (32.6 cubic in.)
Power @3600 RPM 13.4 kW (18 HP)**
Maximum Torque 43.5 Nm (32.1 ft. lb.)
@ 2200 RPM
Compression Ratio 8.5:1
Engine Speed (governed) 3375 RPM
Low Speed 1500 RPM (± 75 RPM)
Spark Plug Gap .76 mm (.030 in.)
Electrical System
System Voltage 12-volt Negative Ground
Battery 190 CCA (sealed)
Alternator 15 Amp Regulated
Fuse (automotive type) 20 Amp
Headlights Incandescent
Brakes
Single Disc (Dry)
Turf Tires
Front (inches) 15 x 6 x 6
Rear (inches) 20 x 10 x 8
Dimensions
Cutting Width, Deck 42 in. (106.7 cm)
Wheelbase 46 in. (116.8 cm)
Length, over all 68 in. (172.7 cm)
Width, over all 45 in. (114.3 cm)
Height, over all 43 in. (109.2 cm)
Ground Clearance 4.5 in. (11.4 cm)
Turning Radius 18 in. (46 cm)
Weight (approximate) 498 lb. (225.9 kg)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet LT1040 and is the answer not in the manual?

Cub Cadet LT1040 Specifications

General IconGeneral
EngineKohler Courage
Cylinders1
Cutting Width42 inches
Cutting Height1.5-4 inches
Deck MaterialSteel
TransmissionHydrostatic
Transmission ManufacturerHydro-Gear
Number of speedsInfinite
Turning Radius18 inches
Number of Blades2
Blade EngagementManual
Front Tire Size15 x 6 inches
Rear Tire Size20 x 8 inches
Speed5.2 mph forward / 2.3 mph reverse
Warranty3 years limited

Related product manuals