EasyManuals Logo

Cub Cadet LTX 1042 User Manual

Cub Cadet LTX 1042
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Engaging the PTO


Move the Throttle/Choke control lever to the FAST (rabbit) 
position.
2.

NOTE: Always operate the tractor with the Throttle/Choke
control lever in the FAST (rabbit) position for the most
efficient use of the cutting deck or other (separately available)
attachments.
Mowing
WARNING! To help avoid blade contact or a
thrown object injury, keep bystanders, helpers,
children and pets at least 75 feet from the machine
while it is in operation. Stop machine if anyone
enters the area.
The following information will be helpful when using the cutting
deck with your tractor.
WARNING! 
discharge of materials toward roads, sidewalks,
bystanders and the like. Also, avoid discharging
material against a wall or obstruction which may
cause discharged material to ricochet back toward
the operator.
Do not mow at high ground speed, especially if a mulch kit 
or grass collector is installed.
Do not cut the grass too short. Short grass is prone to weed 
growth and yellows quickly in dry weather.
Always operate the tractor with the throttle lever in the 
FAST (rabbit) position while mowing.
For best results it is recommended that the first two laps be 
cut with the discharge thrown towards the center. After the
first two laps, reverse the direction to throw the discharge
to the outside for the balance of cutting. This will give a
better appearance to the lawn.

extremely tall grass. Your tractor is designed to mow lawns,

Keep the blades sharp and replace the blades when worn.
18 se c t i O n 5— Op e r a t i O n

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet LTX 1042 and is the answer not in the manual?

Cub Cadet LTX 1042 Specifications

General IconGeneral
Engine BrandKohler
Engine Power19 HP
Engine Displacement597cc
TransmissionHydrostatic
Blades2
Deck MaterialSteel
Front Tires15x6-6
Rear Tires20x8-8
Engine ModelCourage
Cutting Width42 inches
Turning Radius18 in
Wheel Size (Front)15 in
Wheel Size (Rear)20 inches
Warranty3 years
Cutting Height1.5 - 4 in. (3.8 - 10.2 cm)

Related product manuals