Cub Cadet RZT S Series User Manual

Problem Cause Remedy
Excessive vibration 1. Cutting blade loose or unbalanced.
2. Damaged or bent cutting blade.
1. Tighten blade and spindle.
2. Replace blade.
Uneven cut 1. Deck not leveled properly.
2. Dull blade.
3. Uneven tire pressure.
1. Perform side-to-side deck adjustment.
2. Sharpen or replace blade.
3. Check tire pressure in all four tires.
Mower will not mulch grass
(If Equipped w/Mulching Kit)
1. Engine speed too low.
2. Wet grass.
3. Excessively high grass.
4. Dull blade.
1. Place throttle/choke control lever in FAST
(rabbit) position.
2. Do not mulch when grass is wet.
3. Mow once at a high cutting height, then
mow again at desired height or make a
narrower cutting swath.
4. Sharpen or replace blade.
Trou bleshooting
8
30

Cub Cadet RZT S Series Specifications

General

Transmission	Hydrostatic
Seat Type	High-back
Engine Brand	Kohler
Cutting Width	54 inches
Fuel Capacity	3.5 gallons
Deck Material	Steel
Speed	7 mph
Weight	600 lbs
Warranty	3 years
Engine Power	22-25 HP