Cub Cadet S6031

24 se c t i O n 5— Op e r a t i O n
Reconfigurable Mower
Front Skirt
Inner
Baffle
Discharge
Baffle
Cutting
Blades
Gauge
Wheels
Front
Roller
Rear
Rollers
Standard set-up Low Installed Installed 






Stems (Dandelion, Bahia,
Buckhorn, etc.)
Med Removed Installed 

2-⁄



2-⁄



2-⁄


Very Lush &/or tall grass  Removed Installed 

2-⁄



2-⁄



2-⁄


Low cut height (1 to 2”) Med Installed Installed Low-lift

2-⁄

2-⁄

2-⁄
Mulch Low Installed Removed

Mulch

2-⁄



2-⁄



2-⁄


Material collection Low Installed Installed 

2-⁄



2-⁄



2-⁄


Abrasive (sandy), dry Low Removed Installed Low-lift

2-⁄



2-⁄



2-⁄


Wet Low Installed Installed 

2-⁄



2-⁄



2-⁄


Table Notes: This table is a general outline of suggested settings, mowing conditions may vary.
Front Skirts: 

Inner Baffle: The inner baffle regulates grass discharge. Remove the inner baffle for high-volume grass and install the inner baffle for
precision cutting.
Discharge Baffle: The discharge baffle enhances the grass discharge pattern. The discharge baffle reduces clumping and should be
removed for mulching.
Gauge Wheels: The gauge wheels reduce scalping, help with precison cutting and reduce turf defacement during turns.
Rear Rollers: The rear rollers reduce scalping and gives grass a striped appearance.
Cutting Blades: The cutting blades cut grass, create grass lift and discharge grass through the discharge chute.
Discharge Chute: The discharge chute controls the mower deck discharge and enhances the discharge pattern
NOTE: To avoid damaging grass, no more than ⁄
