14
1
STOP
START
OPERATION
A. STARTING:
WARNING
Reread the Safety Precautions relating
to “Starting” on Page 3.
WARNING
When the engine starts, the cutting tool may
rotate even with the throttle trigger in the
low-speed position possibly causing injury.
1. When the Engine is Cold.
a. Slide the ignition switch (Ref.1) to the “START”
position. (Away from the arrow.)
2
3
4
5
c. Close the choke (Ref.3) completely.
d. Grasp the throttle trigger (Ref.4) fully, then
release it slowly while pushing the lock button
(Ref.5). This sets the throttle trigger at half-
throttle.
b. Push the priming pump (Ref. 2) several times.
6
To Next Page
Loading...
