Cub Cadet Z-Force L User Manual

Troubleshooting
8
32
Problem Cause Remedy
Excessive vibration 1. Cutting blade loose or unbalanced.
2. Damaged or bent cutting blade.
1. Tighten blade and spindle.
2. Replace blade.
Uneven cut 1. Deck not leveled properly.
2. Dull blade.
3. Uneven tire pressure.
1. Perform side-to-side deck adjustment.
2. Sharpen or replace blade.
3. Check tire pressure in all four tires.
Mower will not mulch grass
(If Equipped w/Mulching Kit)
1. Engine speed too low.
2. Wet grass.
3. Excessively high grass.
4. Dull blade.
1. Place throttle in FAST (rabbit) position.
2. Do not mulch when grass is wet.
3. Mow once at a high cutting height, then
mow again at desired height or make a
narrower cutting swath.
4. Sharpen or replace blade.

Cub Cadet Z-Force L Specifications

General

Engine Brand	Kohler
Engine	Kohler 7000 Series
Cutting Width	48 inches
Transmission Type	Hydrostatic
Deck Material	Steel
Deck Construction	Fabricated
Number of Blades	3
Weight	750 lbs
Turning Radius	Zero-Turn
Cutting Height	1.5 - 4 in
Fuel Capacity	3.5 gallons
Seat Type	High Back
Warranty	3-year limited