Cub Cadet Z-Force S 60 User Manual

CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
Op e r a t O r ’s Ma n u a l
Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
Z-Force S 60
Liquid Propane Gas
Form No. 769-05905
(March 9, 2010)

Cub Cadet Z-Force S 60 Specifications

General

Type	Zero-Turn Mower
Engine	Kohler 7000 Series
Engine Size	725 cc
Cutting Width	60 inches
Blades	3
Transmission	Hydrostatic
Speed	7 mph
Fuel Capacity	3.5 gallons
Deck Material	Steel
Warranty	3 years

Summary

To The Owner

Owner Information and Support

Provides information on product registration, customer support contacts, and helpful resources for owners.

Important Safe Operation Practices

General Operation Safety Rules

Key safety guidelines for operating the tractor, including reading the manual and general precautions.

Slope Operation Safety

Critical safety instructions for operating the tractor on inclines, including prohibited actions.

Specific Safety Concerns

Safety precautions related to children, towing operations, and general service procedures.

Operational and Environmental Warnings

Warnings regarding engine modification, emissions compliance, and spark arrestor requirements.

Safety Symbols Guide

Assembly and Setup Guide

Unpacking and Preparation

Steps for unpacking the tractor, checking crate contents, and initial preparation for assembly.

LPG System Setup

Instructions for initial LPG tank fill-up, including purging and installing tank strap assemblies.

Steering Column and Wheel Assembly

Procedure for adjusting the steering column and installing the steering wheel and cover.

Seat and Battery Connection

Steps for installing the operator's seat and connecting the battery cables correctly.

Controls and Features Overview

Ignition and Deck Lift Controls

Details on operating the ignition switch module and the deck lift pedal for height adjustment.

PTO and Hour Meter Functions

Operation of the PTO switch for engaging the cutting deck and the hour meter/indicator panel.

Operator Controls

Information on seat adjustment, fuel system, throttle control, and parking brake engagement.

Transmission Bypass Rods

Explains the function and location of transmission bypass rods for manual pushing.

Indicator Panel and Pedals

Explanation of indicator lights and operation of the drive and reverse pedals.

Transmission Oil Reservoir

Description of the transmission oil expansion reservoir and its function.

Operation Guide

General Operation and Pre-Checks

Guidelines for safe operation, including pre-operation checks and general safety rules.

Safety Interlock System

Details on the tractor's safety interlock system and its importance for operator protection.

Starting and Stopping the Engine

Procedures for starting, cold weather starting, jump starting, and stopping the tractor engine.

Driving and Reverse Operation

Instructions for driving the tractor forward, in reverse, and using the reverse caution mode.

Slope Driving and Mowing

Guidance on safe operation on slopes and best practices for mowing lawns.

Deck Lift and PTO Engagement

How to use the deck lift pedal and engage the PTO for mowing operations.

Maintenance and Adjustments

Scheduled Maintenance

Comprehensive schedule of maintenance tasks based on operating hours and time intervals.

Engine and LPG Tank Maintenance

Procedures for changing engine oil and replacing the LPG fuel tank.

Fluid and Component Checks

Maintenance for air cleaner, spark plugs, hydrostatic transmission, and battery.

Storage and Cleaning Procedures

Steps for preparing the tractor for storage, cleaning, and removing it from storage.

Lubrication and Tire Pressure

Guidelines for lubricating various points, checking tire pressure, and general adjustments.

Deck Adjustment Procedures

Instructions for leveling the mower deck side-to-side and adjusting belt tension.

Wheel, Seat, and Brake Adjustments

Procedures for adjusting deck wheels, operator seat position, and parking brake.

Service Information

Battery Service

Instructions for battery removal, installation, and charging procedures.

Electrical System Service

Information on servicing the electrical system, including fuses, relays, and switches.

Mower Deck Removal

Step-by-step instructions for safely removing the mower deck from the tractor.

Mower Deck Installation

Step-by-step instructions for reinstalling the mower deck onto the tractor.

Belt Replacement and Blade Care

Procedures for replacing mower belts and essential care for mower blades.

Spindle and Drive Belt Service

Instructions for changing spindle assemblies and transmission drive belts.

Troubleshooting Guide

Common Operational Issues and Solutions

Guide to diagnosing and resolving common engine and mower performance problems.

Replacement Parts List

Engine and Belt Components

Part numbers and descriptions for engine parts, filters, and drive belts.

Deck and Wheel Components

Part numbers and descriptions for mower deck parts, blades, spindles, and wheels.

Controls and Wheel Assemblies

Part numbers for control cables, ignition keys, chute deflectors, and wheel assemblies.

Attachments and Accessories

Optional Equipment

List of available attachments and accessories for the tractor, with part numbers.

Emission Control Warranty Statement

Warranty Rights, Obligations, and Responsibilities

Details owner's rights, MTD's obligations, and owner's responsibilities under the warranty.

Warranty Coverage Details

Explanation of what is covered under the warranty, including duration and conditions.

List of Covered Warranted Parts

Specific list of emission-related parts covered by the manufacturer's warranty.

Manufacturer's Limited Warranty

Warranty Prerequisites and Service

Information on required proof of purchase, maintenance records, and how to obtain warranty service.