Cub Cadet Z-Force SX 54 - Page 15

15
Product Care
4
Maintenance Schedule
Before Each
use
After First 5
Hours
Every 10
Hours
Every 25
Hours
Every 50
Hours
Every 100
Hours
Prior to
Storing
See Engine
Manual
Check/Clean Engine Intake Screens &
Cooling Fans #
P P
Check/Clean Exhaust Manifold, Muer Pipe
& Muer Shields #
P P
Check/Clean Top & Underside of Deck, Under
& Around Spindle Covers & Belt Area #
P P
Check/Clean Around Fuses, Wiring &
Wiring Harnesses #
P P
Check/Clean Around Transmission,
Axle & Fans #
P P
Check Engine Oil Level
P
Check Air Filter for Dirty, Loose or
Damaged Parts
P
Clean Transmission Cooling Slots
P
Clean Battery Terminals
P P
Grease All Lubrication Points
P P
Check Blades/Sharpen or Replace as Needed
P P
Check Tire Pressure
P P
Lube Front Wheels
P P
Check/Clean Underside of Deck
P
Inspect & Lube Deck Wheels
P P
Check Deck Level/Pitch
P P
Lube Deck Spindles
P P
Check Belts & Pulleys for Damage/Wear
P
Check that All Hardware is in Place & Secure
P
Check & Clean Under Floorboard
P P
Check Spark Plug Condition & Gap
P P P
Engine Break-In Oil Change
P P
Change Engine Oil
P P P
Replace Oil Filter
P P P
Clean or Change Air Filter
P P
Replace Fuel Filter
P P
Have Valve Lash Checked & Adjusted *
P
* -- Have this item performed by an authorized service dealer
#-- Perform more often in dry conditions and/or when mulching