Cub Cadet ZTX5 54

Safe Operations Practices • Assembly • Operation • Service and Maintenance • Troubleshooting
OperatOr’s Manual
WARNING
CALIFORNIA PROPOSITION 65
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm.
Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and
reproductive harm. Wash hands after handling.
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate this machine.
Failure to comply with these instructions may result in personal injury.
Record Product Information
Before setting up and operating your new equipment, please locate
the model plate on the equipment and record the information in the
provided area to the right. You can locate the model plate by lifting
up the seat and looking under the seat pan. This information will be
necessary, should you seek technical support via our web site or with
your local authorized service dealer.
Model NuMber
Serial NuMber
Form No. 769-25923
(November 5, 2020)
Safe Operations Practices ......................................................... 2
Assembly ................................................................................ 7
Operation ..............................................................................11
Service and Maintenance ........................................................17
Troubleshooting .................................................................... 24
Parts/Warranty ...................................See Separate Supplement
Table of Contents
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may differ
from yours.
Zero-Turn Tractor
Lapbar Drive Control Levers

Cub Cadet ZTX5 54 Specifications

General

Engine	Kohler 7000 Series
Deck Type	Fabricated
Cutting Width	54 inches
Fuel Capacity	3.5 gallons
Cutting Height	1.5 - 4.5 in
Warranty	3-year

Summary

Safe Operations Practices

General Information

Covers understanding the manual, operator responsibilities, and essential pre-operation checks.

Operator Protective Systems

Details the importance and correct use of the Roll Over Protective Structure (ROPS) and seat belts.

Safe Operating Procedures

Provides instructions for safe operation, including handling children, slopes, and fuel.

Towing and Hauling Safety

Safety precautions for transporting the tractor via towing or hauling.

Assembly

Tractor Preparation and Movement

References for assembly and instructions for preparing and moving the tractor.

Component Installation and Adjustment

Steps for installing the hitch, seat, adjusting ROPS, controls, and deck wheels.

Battery Connection and Maintenance

Procedures for safely connecting, maintaining, and charging the tractor battery.

Operation

Tractor Controls Overview

Overview of major tractor controls including lapbar levers, deck controls, PTO, ignition, and throttle.

Driving and Maneuvering

Instructions for starting the engine, driving, turning, and safely stopping the tractor.

Mowing Procedures

Detailed guidance on safe and effective mowing techniques, including slope and striping.

Service and Maintenance

Maintenance Schedule

Comprehensive schedule outlining required maintenance tasks at various intervals.

Tractor Cleaning and Storage

Procedures for cleaning, caring for, and storing the tractor properly.

Adjustments and Settings

Instructions for adjusting the deck, controls, parking brake, and other tractor settings.

Component Service

Procedures for servicing the electrical system, deck, belts, and blades.

Troubleshooting

Troubleshooting Guide

A guide to diagnosing and resolving common engine and tractor operational issues.