Cub Cadet ZTX4 60

To Next Page

Safe Operations Practices • Assembly • Operation • Service and Maintenance • Troubleshooting

OperatOr’s Manual

WARNING

CALIFORNIA PROPOSITION 65

Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer

and birth defects or other reproductive harm.

Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and

reproductive harm. Wash hands after handling.

WARNING

Read and follow all safety rules and instructions in this manual before attempting to operate this machine.

Failure to comply with these instructions may result in personal injury.

Record Product Information

Before setting up and operating your new equipment, please locate

the model plate on the equipment and record the information in the

provided area to the right. You can locate the model plate by lifting

up the seat and looking under the seat pan. This information will be

necessary, should you seek technical support via our web site or with

your local authorized service dealer.

Model NuMber

Serial NuMber

Form No. 769-25923

(November 5, 2020)

Safe Operations Practices ......................................................... 2

Assembly ................................................................................ 7

Operation ..............................................................................11

Service and Maintenance ........................................................17

Troubleshooting .................................................................... 24

Parts/Warranty ...................................See Separate Supplement

Table of Contents

NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may differ

from yours.

Zero-Turn Tractor

Lapbar Drive Control Levers

Main Page

Other manuals for Cub Cadet ZTX4 60

Assembly3 pages

Need help?

Do you have a question about the Cub Cadet ZTX4 60 and is the answer not in the manual?

Cub Cadet ZTX4 60 Specifications

General

Engine Brand	Kohler
Cutting Width	60 inches
Deck Construction	Fabricated
Number of Blades	3
Ground Speed Forward	7 mph
Ground Speed Reverse	3.5 mph
Blade Tip Speed	18, 500 fpm
Deck Material	Steel
Cutting Height Range	1.5 to 4.5 inches
Warranty	3 years limited