EasyManua.ls Logo

Cub Cadet ZTX6 60

Cub Cadet ZTX6 60
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Safe Operations Practices • Assembly • Operation • Service and Maintenance • Troubleshooting
OperatOrs Manual
WARNING
CALIFORNIA PROPOSITION 65
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm.
Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and
reproductive harm. Wash hands after handling.
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate this machine.
Failure to comply with these instructions may result in personal injury.
Record Product Information
Before setting up and operating your new equipment, please locate
the model plate on the equipment and record the information in the
provided area to the right. You can locate the model plate by lifting
up the seat and looking under the seat pan. This information will be
necessary, should you seek technical support via our web site or with
your local authorized service dealer.
Model NuMber
Serial NuMber
Form No. 769-25923
(November 5, 2020)
Safe Operations Practices ......................................................... 2
Assembly ................................................................................ 7
Operation ..............................................................................11
Service and Maintenance ........................................................17
Troubleshooting .................................................................... 24
Parts/Warranty ...................................See Separate Supplement
Table of Contents
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may differ
from yours.
Zero-Turn Tractor
Lapbar Drive Control Levers
Question and Answer IconNeed help?

Do you have a question about the Cub Cadet ZTX6 60 and is the answer not in the manual?

Cub Cadet ZTX6 60 Specifications

General IconGeneral
Cutting Width60 inches
Cutting Height1.5 - 4.5 inches
Deck TypeFabricated
Ground Speed Reverse3.5 mph
Blade Tip Speed18, 500 fpm
Product TypeZero Turn Lawn Mower
Turning RadiusZero-Turn
Warranty3-year limited

Summary

Safe Operations Practices

Product Information and Safety Warnings

Record product details and heed California Proposition 65 warnings.

General Operating Guidelines and Preparation

Covers general safety, preparation, and operator protective systems.

Slope Operation and Hazard Avoidance

Safe practices for slopes, fire, fuel, children, and general operation.

Transport, Service, and Emissions Safety

Safety for hauling, service, emissions, and spark arrestors.

Interpreting Safety Symbols

Explanation of various safety symbols found on the tractor.

Assembly Procedures

Tractor Movement and Hitch Installation

Instructions for moving the tractor manually and installing the hitch.

ROPS and Seat Setup

Details on setting up the ROPS and installing the operator's seat.

Adjusting Drive Controls and Deck Chute

Adjusting lapbar controls and the deck discharge chute deflector.

Deck Wheel Adjustment

Adjusting anti-scalp deck wheels for proper clearance.

Battery Installation and Maintenance

Connecting, maintaining, and charging the tractor battery.

Seat Suspension and Adjustment

Adjusting the seat suspension and operator's seat position.

Operating the Tractor

Control Layout and Ignition

Overview of lapbar levers, PTO, ignition switch, and bypass rods.

Pre-Operation Checks and Indicators

Fuel gauge, hour meter, service minder, and other indicators.

Engine Starting Procedures

Safe engine starting, interlocks, cold weather, and jump starting.

Driving and Steering Techniques

How to drive forward, turn, and maneuver the tractor.

Reverse Operation and Zero Turns

Operating in reverse, turning, and executing zero turns.

Mowing Best Practices

Guidelines for effective and safe mowing.

Service and Maintenance

Maintenance Schedule and Intervals

Chart detailing regular service intervals and tasks for the tractor.

Post-Operation Care and Tractor Storage

Guidelines for cleaning the tractor and preparing it for storage.

Engine, Battery, and Transmission Maintenance

Procedures for changing engine oil, servicing battery, and transmission.

Deck Leveling and Adjustment

How to adjust deck lift, side-to-side, and front-to-rear pitch.

Component Adjustments and Deck Removal

Adjusting wheels, controls, brakes, and removing the mower deck.

Deck Installation and Belt Replacement

Installing the mower deck and replacing drive belts.

Troubleshooting Guide

Engine Starting and Running Issues

Resolving problems like engine not starting or running erratically.

Performance and Operational Problems

Addressing issues like overheating, vibration, and uneven cuts.

Related product manuals