Cube Controls FPRO - Usage Tips; Sticker Application and Cable Management; Grounding and Quick Release Kit

Note
10. Useful tips
Each wheel comes with a full sheet of stickers and a set of plastic tweezers useful to install them
to your liking. Before applying the sticker make sure the surface it’s clean.
Try to install the USB coiled cable by wrapping it loosely on your FFB motor shaft/adapter
in such a way that it will not suffer any strain even when doing full opposite steering rotations.
Make sure your rig is grounded correctly.
Each wheel comes with an auxiliary USB connector that comes out from the main hub.
This will be used with our Cube Controls QRX quick release kit.
19