13 . Assembly instructions
9.— Assembly Instructions
9.1.—MTB frame
Max. 6 Nm | Min. 5Nm
Use only original seat cl amp collar !
= To rque
Max. 4 Nm | Min. 3Nm
E-Type derailleur
Derailleur gear mount
Max. 8 Nm | Min. 6Nm
Max. 50Nm permissible
(follow manufacturer’s instructions!)
On frames with a bottom bracket thread
use only „BSA“ type inner bearings.
Grease thread well On frames with
„Pressfit“ bottom bracket fitting please
use appropriate inner bearings
Use suitab le tool to fit inner bearings!
Bottle hol der mount
Use only M5 screws
Max. 5 Nm | Min. 4Nm
Integrated / semi-integrated he adset
Use suitab le tool
Do not use any gr ease when
pressing in!
Seat post projection
Note mark on post
Do not use any gr ease when
fitting the saddle post!
Seat post minimum inser-
tion dept h: 100mm
brake caliper mounting
Max. 8 Nm | Min. 7Nm
To Next Page
Loading...
