Cube Cargo Hybrid User Manual

Version 2 / 09.22
1
Assembly instructions for CUBE Cargo Hybrid
ATTENTION:
The executing specialist dealer is responsible and liable for the proper final assembly.
Work on the steering assembly must be carried out by qualified personnel only.
Only the connecting elements supplied in the accessory pack, replacement screws or nuts of the
appropriate strength class may be used.
!

Cube Cargo Hybrid Specifications

General

Battery	Bosch PowerPack 500
Battery Capacity	500 Wh
Gears	10-speed
Frame	Aluminum
Drive Unit	Bosch Performance Line
Display	Bosch Purion
Shifter	Shimano Deore
Rear Derailleur	Shimano Deore
Crankset	Shimano Deore
Cassette	Shimano Deore
Chain	KMC e10
Front Hub	Shimano Deore
Rear Hub	Shimano Deore
Stem	Cube
Handlebar	Cube
Grips	Cube
Seatpost	Cube
Saddle	Cube
Pedals	Cube
Mudguards	SKS
Bell	Cube
Kickstand	Cube
Motor	Bosch Performance Line
Brakes Type	Hydraulic Disc

Summary

Assembly Instructions Overview

ATTENTION: Critical Assembly Warnings

Critical warnings regarding dealer responsibility, qualified personnel, and correct parts for final assembly.

General Information and Safety

Required Professional Qualification

Crucial Safety Precautions

Outlines essential safety measures to be followed before, during, and after assembly to prevent injury.

Initial Assembly Procedures

Connecting Front and Rear Frame Parts

Step-by-step guide for joining the front and rear sections of the cargo bike frame.

Routing the Front Brake Hose

Instructions on how to properly route the front brake hose, ensuring it doesn't interfere with steering.

Mounting Box Halves and Upper Frame

Steering System Assembly

Connect Steering Rod to Rear Headset

Procedure for attaching the steering rod to the rear headset using specific hardware and torque.

Connect Steering Rod to Front Headset

Check and Adjust Steering Stop

Instructions for checking and adjusting the steering stop to maintain correct distance between tire and steering rod.

Align Handlebars and Front Wheel