14 . Assembly instructions
9.2.—The racing bike frame
Max. 6 Nm | Min. 5Nm
Use only original
seat clamp collar !
Brake caliper mounting
Max. 8 Nm | Min. 7Nm
Max. 5 Nm | Min. 4Nm
(gradually)
Solder-on socket or
derailleur clamp coll ar
Derailleur gear mount
Max. 8 Nm | Min. 7Nm
Bottle hol der mount
Use only M5 screws
Max. 5 Nm | Min. 4Nm
Integrated / semiintegrated he adset
Use suitab le tool
Do not use any gr ease
when pres sing in!
Seat post projection
Note mark on post
Do not use any gr ease
when fitting the saddle post!
Seat post minimum
insertion depth: 90mm
= To rque
Max. 50Nm permissible
(follow manufacturer’s instructions!)
On frames with a bottom bracket thread
use only „BSA“ type inner bearings.
Grease thread well. On frames with
„Pressfit“ bottom bracket fitting please
use appropriate inner bearings.
Use suitab le tool to fit inner bearings!
To Next Page
Loading...
