3
www.cubert-gmbh.de
1.3 Miscellaneous notes
The camera is an optical measurement device. Rapid changes in ambient conditions (temperature, air
humidity) might steam up optical elements in the camera system. These condensations may give rise
to malfunction.
In order to avoid condensed water place camera into
a closed plastic container prior exposing to high ambient
condition changes.
Leave camera in plastic container until the air
temperature within the container reaches the
ambient temperature.
The camera might get hot during operation. This is normal and does not pose an incident.
By default, the focal point of the camera is set to infinity. Any change of the optics (focus,
aperture) might misalign the system. If you think you might have misaligned the optic
check your camera system.
If it does not provide satisfactory results, please contact Cubert support for re-calibration.
The “CE” sign confirms, that this product complies with European regulations for safety,
healthcare, environmental protection and operator’s protection. Cameras with “CE”
symbol are destined for the European market.
This symbol indicates the separate return and recycling of electric and electronic devices
in EU-countries. Please do not dispose device to household waste. Please inform your-
self about the respective recycling regulations in your country when disposing of the
device.
This symbol indicates the separate return and recycling or batteries and rechargeable
batteries within EU. Please do not dispose of batteries or rechargeable batteries to the
household waste. Please inform yourself about the respective recycling regulations in
your country when disposing of the batteries or rechargeable batteries.
To Next Page
Loading...