Cudy FS1010PG User Manual

Physical Appearance2
Specifications3
Hardware Connection
1
Working Temperature
Bandwidth
Storage Temperature
Working humidity
Storage humidity
Working hight
Storage hight
-20~50℃
-40~85℃
Max relative humidity 90%, non-condensing
Max relative humidity 95%, non-condensing
Max 10,000 feet（3,000 meters）
Max 10,000 feet（3,000 meters)
Model FS1010PG
Network Protocol
PoE Standard
PoE Voltage
Power Pin
AC Input Voltage
Output
Total Power
Dimension(L×W×H)
Power Socket
PoE or Ethernet Device
(switch, router, etc.)
Wireless AP Smart VoIP
IP Camera
Powered Device (PD)
Internet
Front board
Back board
10/100Mbps PoE Port
Gigabit Port
Power input port
IEEE802.3 / IEEE802.3u
IEEE802.3x / IEEE802.3af/at / IEEE802.3ab
IEEE802.3at (30W) and IEEE802.3af (15.4w)
DC 52V
Power over spare pairs 1/2(+) , 3/6 (-)
AC100~240V
52V ~ 2.3A
120W
200mm*120mm*45mm
NVR
Monitor
Router
AC INPUT
100V-240V
MAC Address
Packet Buffer Memory
Forwarding Mode
1K MAC address table
2Gbps (non-blocking)
448K
Store-And-Forward
8-Port 10/100M PoE+ Switch with
2 Gigabit Uplink Ports
FS1010PG
1 3 5 7
Extend
Default
VLAN
1 2 3 4 5 6 7 8
G9 G10
PWR SW
8-Port 10/100M PoE+ Switch with
2 Gigabit Uplink Ports
FS1010PG
1 3 5 7
Extend
Default
VLAN
1 2 3 4 5 6 7 8
G9 G10
PWR SW

Cudy FS1010PG Specifications

General

Brand	Cudy
Model	FS1010PG
Category	Switch
Language	English

Summary

Hardware Connection Overview

Powered Device (PD) Examples

Illustrates IP Cameras, Wireless APs, and Smart VoIP phones as powered devices.

Network and Device Connectivity

Shows the switch connecting to Internet, Router, NVR, Monitor, and PoE/Ethernet devices.

Physical Appearance

Front Board Details

Details the front panel of the PoE+ switch, including Gigabit Uplink ports.

Back Board Details

Details the back panel of the PoE+ switch, including the power input port.

Product Specifications

Device and Network Specifications

Covers Model, Network Protocol, PoE Standard, Voltage, Power Pin, AC Input, Output, Total Power, Dimensions.

Performance and Environmental Specifications

Includes Bandwidth, MAC Address, Buffer Memory, Forwarding Mode, Temperature, Humidity, and Altitude.

DIP Switch Settings

DIP Functionality Explanation

Explains settings for VLAN (Port Isolation), Default (Standard Switch), and Extend (Link Extension).

LED and Interface Indicators

Power LED Status

Describes the Power LED indications for powered or no power states.

SW Mode and Link ACT Status

Explains indications for SW Mode (DIP LED) and Link ACT (Link LED) states.

Compliance and Support

EU Declaration of Conformity

States compliance with essential requirements of EU directives.

Support Contact Information

Provides the official website and email for product support.