Cudy GS105 User Manual

Quick Installation Guide
5-Port 10/100/1000Mbps Switch
Model: GS105
For support and warranty, please visit: http://www.cudytech.com/.
Specifications are subject to change without notice. Cudy is a
registered trademark of Shenzhen Cudy Technologies Co., Ltd. Other
brands and product names are trademarks or registered trademarks
of their respective holders.Copyright@2019 Shenzhen Cudy
Technology Co., Ltd. All rights reserved.
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The
original EU declaration of conformity may be found at
http:// www.cudytech.com/en/ce
810600023
Main Features
3
CE Mark Warning
This is a class B product. In a domestic environment, this product
may cause radio interference, in which case the user may be
required to take adequate measures.
Standards
Link/Act
Power
Number of Ports
Transfer Method
Switching Capacity
MAC capacity
Dimensions
Environment
Frame Filtering
and Forward Rate
Power Supply
Consumption
Network Media
(Cable)
LED
IEEE802.3 10Base-T,IEEE802.3u
100Base-TX, IEEE802.3az,IEEE802.3ab
5 x 10/100/1000Mbps Auto-Negotiation ports
Green
Store-and-Forward
10Gbps
2K
140*78*28 mm (L x W x H)
10Mbps: 14880pps
100Mbps: 148800pps
1000Mbps: 1488000pps
Input: DC 5V /1A(adapter)
Consumption: 2.75W
Operating Temperature: 0℃ - 40℃
Storage Temperature: -10℃ - 70℃
Operating Humidity: 10%~90% non-condensing
Storage humidity: 5%~90% non-condensing
10M/100M: Green
1000M: Amber
10BASE-T: UTP category 3,4,5 cable (maximum 100m)
100BASE-Tx: UTP category 5, 5e cable (maximum 100m)
1000BASE-T: UTP category 5e, 6 cable (maximum 100m)

Cudy GS105 Specifications

General

Switching Capacity	10Gbps
Forwarding Rate	7.44Mpps
MAC Address Table	2K
Jumbo Frame	9KB
Ports	5 x 10/100/1000Mbps
Standards	IEEE 802.3, IEEE 802.3u
Power Consumption	2.5W
Power Supply	External

Summary

Main Features and Specifications

Supported Standards

Lists the IEEE standards supported by the switch, including 10Base-T, 100Base-TX, IEEE802.3az, and IEEE802.3ab.

Network Media Requirements

Details the UTP cable categories required for 10BASE-T, 100BASE-TX, and 1000BASE-T connections.

Port and LED Indicators

Specifies the number of ports and the colors of LED indicators for Link/Act and Power status.

Operational Specifications

Covers transfer method, switching capacity, MAC capacity, and frame filtering/forwarding rates.

Physical and Environmental Details

Includes the device dimensions, operating/storage temperatures, and humidity levels.

Power Supply Information

Details the power input requirements (DC 5V/1A) and consumption (2.75W).

Regulatory Compliance Information

CE Mark Warning

Warns that the product is Class B and may cause radio interference in domestic environments.

EU Declaration of Conformity

States compliance with essential requirements of EU directives and provides a link to the full declaration.

Physical Connection Guide

Connecting Network Devices

Illustrates how to connect the switch to a router, PC, and Wi-Fi printer using LAN ports.

Power Connection

Shows the connection of the power adapter and power cord to the switch.

LED Status Indicators

Power LED

Indicates the status of the power supply: ON (power on) or OFF (power off).

Link/Act LED

Shows device connection status (Green for 10/100M, Amber for 1000M) and activity (Flashing).