Cudy POE150 User Manual

Quick Installation Guide
Model: POE150/POE200
For support and warranty, please visit: http://www.cudy.com/.
Specifications are subject to change without notice. Cudy is a
registered trademark of Shenzhen Cudy Technologies Co., Ltd.
Other brands and product names are trademarks or registered
trademarks of their respective holders.Copyright©2020 Shenzhen
Cudy Technology Co., Ltd. All rights reserved.
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The
original EU declaration of conformity may be found at
http://www.cudy.com/
810600073
CE Mark Warning
This is a class B product. In a domestic environment, this product
may cause radio interference, in which case the user may be
required to take adequate measures.
Indicators
System Indicator: AC Power
User Indicator: Channel Power
Connectors
Protection
Shielded RJ-45, EIA 568A and 568B
Over voltage protection
Anti-interference protection
Operating Temperature: 0 to 40℃
Operating Humidity:Maximum 85%
Storage Temperature:-40 to 60℃
Environmental
Conditions
Over current protection
Over load protection
Model
Output Voltage
PoE Power
Pin Polarity
POE150/POE200
Standard
1/2 (-), 3/6 (+)
802.3af/at
Data Rates 10/100/1000Mbps
Input Power
Requirements
Dimensions 121mm x 50mm x 36mm
54VDC
30W max
AC Input Voltage: 100 to 240 VAC
AC Input Current: 0.5A 100-240 VAC
AC Frequency: 50 to 60 Hz
Specifications
4

Cudy POE150 Specifications

General

Brand	Cudy
Model	POE150
Category	Media Converter
Language	English

Summary

Product Specifications

Model and Output

Details product model, output voltage, and PoE power rating.

Standards and Pin Polarity

Specifies the PoE standard and pin polarity configuration.

Data Rates and Input Requirements

Covers data transmission rates and AC input power specifications.

Connectors and Protection

Lists connector types and implemented over-current/over-load protections.

Environmental Conditions

Defines operating and storage temperature and humidity limits.

Compliance and Warnings

CE Mark Warning

Alerts users about potential radio interference for Class B products.

EU Declaration of Conformity

States compliance with EU essential requirements and directives.

Hardware Connection Guide

Connecting Devices

Illustrates connecting a PoE injector to Ethernet devices and powered devices.

LED and Interface Explanation

Interface Ports

Explains the function of DATA IN, P+DATA OUT, and AC Socket.

LED Indicators

Details the meaning of Green and Red LED indicators for power status.