Cudy RE1200 User Manual

7
3. Relocate the extender halfway between your router and the Wi-Fi dead zone,
find a good place to plug it according to the LED.
Red Flash: Connecting / not connected to host Wi-Fi
Solid Red: Connected, signal is weak
Solid Purple: Connected, signal is fair
Solid Blue: Connected, signal is strong
LED and Button
LED
Colour
Status
Indication
/
Off
No host Wi-Fi configuration
Red
Flash
Connecting / not connected to host Wi-Fi
On
Connected to host Wi-Fi, signal is weak
Purple
On
Connected to host Wi-Fi, signal is fair
Blue
On
Connected to host Wi-Fi, signal is good
/
Off
Not connected to host Wi-Fi
Blue
Flash
The system is booting or upgrading
On
System startup is complete
/
Off
Not connected to host Wi-Fi
Blue
Flash
WPS in progress
On
Connected to host Wi-Fi
Reset
Long press for 2
seconds
Press and hold Reset button for 2 seconds until all
the LED lights turn on and off.
WPS
Press to take
effect
Press the WPS button until WPS LED start flashing.
Extender
Router
Clients
Halfway
Host WiFi Network
Extended Network

Cudy RE1200 Specifications

General

Brand	Cudy
Model	RE1200
Category	Extender
Language	English