12-CUP CARAFE: BREWING
Add water into the 40-ounce
water reservoir. Plug the power
cord into an independent outlet.
1.
Place mug on tray, open the brew
head and insert capsule.
NOTE: Shelf ips down to
accommodate shorter mugs and
the drip tray can be removed to
accommodate travel mugs.
2.
Lift the grinder basket lid, using
the recess on either side. Fill the
basket with the desired quantity of
beans and replace lid.
Skip this step when brewing
pre-ground coffee.
2.
Press the door release button, and
insert a paper lter or permanent
lter into the lter basket.
When brewing with pre-ground
coffee, add 1 level scoop of
ground coffee per cup. Do not
exceed 16 tablespoons.
Replace the cover, and close door.
3.
Press the POD button once to
enter single-serve mode. Use the
POD button to continuously
scroll through size options until
the desired cup size setting is
displayed on the LCD display
(8, 10, or 12 oz).
3.
Press the BREW/OFF/AUTO OFF
button once. When beverage has
nished dispensing, all lights will
illuminate. Lift brew head to
dispose of the capsule.
4.
Press the CARAFE button to
activate carafe brew mode.
Press BOLD if you prefer a
stronger taste.
When brewing pre-ground coffee,
be sure to press the GRIND OFF
button to turn off the grinder.
4.
Press the BREW/OFF/AUTO OFF
button to begin brewing. Once the
coffee has nished, the unit will
enter Keep Warm mode and alert
you with a beep.
5.
Pour your desired amount of
water into the water reservoir.
A water level indicator is located
on the side of the unit.
1.
SINGLE SERVE: BREWING
ssgb1_20ce074400_qrg_eng_final.indd 2ssgb1_20ce074400_qrg_eng_final.indd 2 11/16/20 10:30 AM11/16/20 10:30 AM
To Previous Page
Loading...
