6
1. On/Off Button
Used to turn your coffeemaker on and off;
also works in tandem with the function
knob.
2. Clock Display
Displays time of day and auto on time.
3. Function Knob
For setting time of day, and auto on time.
a. Auto On
The Auto On feature is used to pro-
gram the start time of the brew cycle.
The auto on time can be set for any
time, day or night. The PM indicator is
displayed on the LCD for nighttime
program times.
b. Program Set
The Program Set function is used to
set the time for the Auto On function.
c. Brew
The Brew function is used to start the
brew cycle directly.
d. Clock Set
Used to program the time of day.
4. Hour and Minute Buttons
For use in setting hour and minute for
time of day, and auto on time.
5. On/Off and Auto On Indicator Lights
6. Clean Setting
Used to indicate time to clean your
coffeemaker to remove calcium buildup.
7. 1-4 Cup Setting
For brewing smaller pots of coffee –
it provides double heating of the water,
so coffee is piping hot.
8. Audible Tone
The Cuisinart
®
Thermal 10-Cup
Programmable Coffeemaker is
equipped with an audible tone which
will sound 5 times when the coffee
has completed brewing (coffee will
continue to stream from the filter
for a few seconds after tone).
2
3
3d
3c
5
3a
3b
1
4
6
7
5
GETTING TO KNOW YOUR CONTROL PANEL
To Next Page
Loading...
Need help?
General
