Cuisinart Brew Central DCC-1200BKSP1 User Manual

QUICK REFERENCE GUIDE
Setup and uSe
2.
Pour your desired amount of water
using the stair step cup measure inside
the water reservoir.
4.
Make sure the filter basket is securely
in place and lid is completely closed.
3.
Insert a permanent gold tone filter or
paper filter into the filter basket holder.
Using the scoop provided, add 1 scoop of
ground coffee per cup. Adjust the amount
to taste and close the lid.
5.
To brew coffee, turn the Function Knob to
the Brew position. Then flip the switch to
the ON position and release. The red ON
indicator light will illuminate
and brewing will begin.
Fully immerse the filter in cold tap water
and soak for 15 minutes (See complete
instructions on page 7 of your Instruction
Booklet). Insert the charcoal water filter into
the water filter holder. Open the water reservoir and
insert into the unit.
1.
IMPORTANT!
Do not throw away. Read before
operating your new coffeemaker.
Keep for further reference.
These helpful hints are intended
to be a supplement to the instruction booklet.
In order to ensure proper operation and
optimum performance, please read the entire
Instruction Booklet.
Please see reverse side for programming instructions.

Cuisinart Brew Central DCC-1200BKSP1 Specifications

General

Brand	Cuisinart
Model	DCC-1200BKSP1
Product Type	Coffee Maker
Type	Drip Coffee Maker
Color	Black
Capacity	12 cups
Programmable	Yes
Auto Shut Off	Yes
Brew Pause Feature	Yes
Water Filtration	Yes
Carafe Material	Glass
Adjustable Keep Warm	Yes
Self-Cleaning	No
Power Source	Electric
Voltage	120 V
Wattage	900W

Summary

Setup and Use

Filter Preparation and Insertion

Immerse filter in cold water for 15 mins, insert charcoal filter & water reservoir.

Fill Water Reservoir

Pour desired amount of water using the stair step cup measure inside the water reservoir.

Add Coffee Grounds

Insert filter, add 1 scoop coffee per cup, adjust to taste, and close lid.

Secure Filter Basket and Lid

Ensure filter basket is securely in place and the lid is completely closed.

Start Brewing Process

Turn Function Knob to Brew, flip switch to ON. Red indicator light illuminates, brewing begins.

Coffeemaker Programming

Set Current Time

Turn knob to Clock, press/hold Hour/Minute until flashing, scroll numbers, press to advance digits.

Program Auto-On Feature

Turn knob to PROG, set brew time, turn to AUTO ON, flip switch ON. Green indicator confirms.

Auto-On Brew Notification

Red On/Off indicator light signals the start of the brew cycle at the programmed time.

Prepare Next Day Auto-On

Turn knob to PROG to set same brew time for next day. Green Auto-On light illuminates.

Program Auto-Off Timer

Turn knob to Auto Off, use Hour/Minute to set shut-off time 0-4 hours after brew cycle.