12
TROUBLESHOOTING
Food Processing
The food is unevenly processed. The ingredients should be cut evenly into 1
to 3cm pieces before processing.
Process in batches to avoid overloading.
Slices are uneven or slanted. Place food cut side down into the feed tube.
Apply even pressure on the pushers.
Food falls over in feed tube. Feed tube should be loosely packed.
Food should not be tightly packed inside the
feed tube for best results.
Some food remains on top of the disc. It is normal for small pieces to remain; cut
remaining bits by hand and add to processed
ingredients.
Universal chopping/mixing/dough blade can-
not be removed from the stem adapter.
Place the blade/stem adapter assembly in a
bowl lled with warm tap water. This should
help loosen trapped food particles between
the blade and stem adapter. To see if food
has loosened, remove assembly from water
by lifting from the stem. Holding the stem,
place the blade assembly on countertop
and press down on stem. This should free
the blade from the stem. If blade still cannot
removed, return to warm water and repeat
above steps.
To Next Page
Loading...
