To Next PageTo Next Page
Need help?Do you have a question about the Cuisinart Prep 11 Plus and is the answer not in the manual?
Secure the work bowl onto the base by turning it counterclockwise until locked into position.
Attach the bowl cover by aligning it with the handle and turning counterclockwise to lock.
Position and firmly slide the pusher assembly and activating rod into the feed tube.
Place the chopping/mixing or dough blade over the work bowl center hub after locking the bowl.
Place the chosen slicing or shredding disc with the cutting-edge down on a flat surface.
Align the detachable stem's raised plastic crescent with the disc's corresponding feature.
Turn the stem to the right until locking tabs click into place, covering metal supports.
Position the stem assembly face down over the work bowl center hub to nest securely.
Secure the work bowl onto the base by turning it counterclockwise until locked into position.
Attach the bowl cover by aligning it with the handle and turning counterclockwise to lock.
Position and firmly slide the pusher assembly and activating rod into the feed tube.
Place the chopping/mixing or dough blade over the work bowl center hub after locking the bowl.
Place the chosen slicing or shredding disc with the cutting-edge down on a flat surface.
Align the detachable stem's raised plastic crescent with the disc's corresponding feature.
Turn the stem to the right until locking tabs click into place, covering metal supports.
Position the stem assembly face down over the work bowl center hub to nest securely.
The Cuisinart Custom Prep 11™ 11-Cup Food Processor, also referred to as the Cuisinart Prep 11 Plus™ Food Processor, is a versatile kitchen appliance designed to simplify various food preparation tasks. Its primary function is to chop, mix, slice, and shred ingredients efficiently, making it an invaluable tool for both everyday cooking and more elaborate culinary endeavors. The device is engineered for ease of assembly and operation, with clear instructions provided to guide users through each step, ensuring safe and optimal performance.
The assembly process for the Cuisinart food processor is straightforward, beginning with the placement of the work bowl onto the base. Users are instructed to position the work bowl on the base and then turn the bowl counterclockwise using its handle until it locks securely into position. This initial step establishes the foundation for all subsequent operations. Following the work bowl, the cover is placed onto the bowl. The cover should be positioned to the left center of the work bowl handle, and then turned counterclockwise until it locks into place. This ensures a secure seal, which is crucial for safe operation and to prevent spills during processing. The final step in the basic assembly involves the pusher assembly and activating rod. These components are positioned over the feed tube bowl cover and then slid down firmly into place. This completes the basic setup, preparing the food processor for the attachment of blades or discs, depending on the desired task.
For chopping and mixing tasks, the Cuisinart food processor utilizes specialized blades. The process begins with the work bowl already locked onto the base. Users are instructed to carefully lift and place either the chopping/mixing blade or the metal dough blade over the work bowl's center hub. The choice of blade depends on the specific food preparation requirement: the chopping/mixing blade is ideal for general chopping, pureeing, and mixing, while the metal dough blade is specifically designed for kneading dough, making it perfect for baking enthusiasts. Proper placement of the blade over the center hub ensures that it is securely seated and ready for operation.
For slicing and shredding tasks, the food processor employs various discs. The procedure for setting up discs is slightly more involved than for blades, requiring the assembly of a detachable stem with the chosen disc. The first step involves selecting the desired slicing or shredding disc. With the work bowl locked on the base, the chosen disc is placed cutting-edge down on a tabletop. Next, the detachable stem is aligned with the raised plastic crescent on the disc. A key indicator for correct alignment is the raised "lock" indicator on the left corner of the stem, which should be positioned to the left of the mounting plate on the disc. Once aligned, the stem is turned to the right. This action causes the locking tabs on the stem to be covered by the metal supports on the disc, and a distinct "click" sound confirms that the stem is securely locked into place. Finally, with the stem facing down, the entire disc assembly is placed over the center hub of the work bowl. It is designed to fit snugly and nest on the bottom of the work bowl, ensuring stability and proper function during slicing or shredding.
The Cuisinart food processor is designed with several features that enhance its usability and safety. The locking mechanisms for the work bowl, cover, and disc assembly are critical safety features, ensuring that the appliance cannot operate unless all components are correctly and securely in place. This prevents accidental spills or injuries during operation. The feed tube and pusher assembly allow for the safe addition of ingredients while the machine is running, which is particularly useful for continuous processing tasks like slicing or shredding. The clear work bowl and cover allow users to monitor the processing progress without interrupting the operation, providing better control over the consistency of the ingredients. The design emphasizes intuitive operation, with visual cues and tactile feedback (like the "click" sound when locking components) to confirm correct assembly.
While the provided manual excerpts focus primarily on assembly and operation, the design of the Cuisinart food processor inherently includes features that facilitate maintenance and cleaning. The components, such as the work bowl, cover, blades, and discs, are typically designed to be easily detachable. This modular design allows for thorough cleaning of each part, preventing food residue buildup and ensuring hygienic use. Most modern food processors from Cuisinart feature dishwasher-safe parts, which significantly simplifies the cleaning process. The smooth surfaces and minimal crevices in the design also contribute to ease of cleaning, as food particles are less likely to get trapped. Regular cleaning of all components after each use is essential to maintain the appliance's performance and longevity. Proper storage of blades and discs, often in dedicated storage cases, is also a key aspect of maintenance, ensuring their sharpness and preventing damage.
The quick reference guide explicitly states an "IMPORTANT!" message: "Do not throw away. Read before operating your new food processor. Keep for further reference." This highlights the significance of the instruction booklet, which provides comprehensive details beyond the quick reference. The quick reference guide itself is intended as a supplement to the full Instruction Booklet. Users are strongly advised to read the entire Instruction Booklet to ensure safe operation and optimum performance. This includes detailed information on specific food processing techniques, troubleshooting, and care instructions that are not covered in the quick guide. Adhering to these guidelines is crucial for maximizing the lifespan of the appliance and ensuring a safe and enjoyable user experience. The Cuisinart food processor, with its robust design and user-friendly features, aims to be a reliable and efficient partner in any kitchen, simplifying complex food preparation tasks and encouraging culinary creativity.
General| Power | 625 watts |
|---|---|
| Capacity | 11 cups |
| Blades | Stainless steel |
| Controls | Touchpad controls |
| Pulse Function | Yes |
| Bowl Material | Plastic |
| Material | Plastic |
| Included Accessories | slicing disc, shredding disc, chopping blade |
