5
PARTS AND FEATURES
4.
1.
3.
2.
BEFORE FIRST USE
Before using your Cuisinart
®
Expert Mini Chopper for the first time, wash the work bowl, work bowl cover
& blade.
1. With the motor base on the tabletop, place the work bowl firmly on the motor base.
2. Turn the work bowl clockwise to lock onto base.
3. CAREFULLY pick up the blade by its hub and place on the centre stem until it drops to the bottom of
the stem. Firmly push to ensure that the blade is locked into position.
IMPORTANT: HANDLE WITH CARE. The blade is razor sharp.
ASSEMBLY INSTRUCTIONS
1. With the work bowl in place on the motor base, and the blade in place on the centre stem, add
any food to be processed.
To do this, place the small tab on the lid to the left of the white column at the back of the work
bowl. Then turn the cover clockwise to securely lock.
NOTE: IF THE LID IS NOT CORRECTLY LOCKED, THE APPLIANCE WILL NOT OPERATE.
THIS IS A SAFETY FEATURE OF THE APPLIANCE.
2. Place the cover on the work bowl.
3. Turn the cover clockwise to securely lock.
4. Plug the unit into wall socket.
5. You are ready to chop / grind.
1. Motor base with control buttons for chop
and grind
2. 3 Cup Removable Work Bowl
3. Work Bowl Cover
4. SmartPower Blade with Bladelock System
To Next Page
Loading...
