NOTICE
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature,
this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to
defeat this safety feature.
INTRODUCTION
Congratulations! You now have a can opener
you’ll be proud to display on your kitchen
counter. This very contemporary Cuisinart
®
Can Opener is constructed of sturdy stainless
steel, with smooth lines and an extra-wide
base. Good looking, and almost impossible to
tip, it requires only a quick press of the lever
to operate. Opening cans has never been
easier.
OPERATING INSTRUCTIONS
1. Plug cord into outlet.
2. Raise can opener lever.
3. Position the can under
the guiding posts and
lower the lever, making
sure the Power Cut
TM
blade is positioned
inside the rim of the
can.
4. Once the Power Cut
TM
blade pierces the can,
cutting begins. There
is no need to hold
the lever down during
cutting.
5. Cutting action will
automatically stop,
once can is completely
open.
6. Can will remain in
position until lever is
lifted.
7. To remove can, hold can firmly with one
hand while lifting lever with the other.
8. Carefully remove lid from magnet.
1. Power Cut
TM
Blade Assembly
2. Can Opener Lever
3. Guiding Posts
4. Can Stop
5. Base
6. Cord Storage (not shown)
1
2
3
4
5
6
3
3
To Next Page
Loading...
