CLEANING AND
MAINTENANCE
1. Be sure the plug has been removed from
outlet.
2. Remove can opener lever by lifting and
pulling toward you. Wash by hand with
hot, sudsy water or place in the top shelf
of a dishwasher. Dry thoroughly.
3. Wipe body of can opener with damp
cloth. (Caution: Do not immerse in water.)
4. Replace can opener lever by holding in
the upright position and snapping back
into place.
5. Always unplug the appliance from the
main outlet before cleaning.
6. Make sure all the parts are clean and dry
before storing.
7. Never immerse power adapter or housing
in water or any other liquids.
8. Never submerge the motor base in water
or other liquids, or place in a dishwasher.
9. Any other servicing should be performed
by an authorized service representative.
SUGGESTIONS
This can opener will open all standard size
cans. It should not be used on cans that have
alternate methods of opening (including but
not limited to pull-tabs, rolling key and peel-
off foil). It also should not be used with rimless
cans or cans with angled corners.
Cans with aluminum lids will not adhere to
magnet.
If there is a dent in the rim of the can, open
other side or place the Power Cut
TM
blade
beyond the dent. If the can opener stalls, use
a light touch to turn the can to aid the cutting
process.
4
To Next Page
Loading...
