Cuisinart SFP-13 SERIES User Manual

With the large
work bowl on
the base, use the
handle to turn
the bowl clockwise
to lock it into
position.
Attach large work
bowl to base. Insert
stem adapter, then
lower the small work
bowl over adapter
into the large bowl.
Place your ngers in
recesses of small
bowl and turn slightly
clockwise to properly
position in the large
bowl.
Lower stem adapter
over center of bowl.
Place disc over
adapter – carefully,
using plastic hub
on shredding disc
and slicing disc.
Grasp the large
chopping/mixing
blade by its hub,
align over center
of bowl, twist into
position and push
down to lock.
Grasp small
chopping/mixing
blade by its hub,
place on stem
adapter, and push
down rmly to lock
in place.
NOTE: Discs
cannot be used in
small work bowl.
OPERATION: LARGE WORK BOWL
OPERATION: SMALL WORK BOWL
1.
1.
3.
2.
2.
STAINLESS STEEL 13-CUP
FOOD PROCESSOR
SFP-13 SERIES
IMPORTANT!
Do not throw away. Read before
operating your new 13-Cup
Food Processor.
Keep for future reference.
These helpful hints are intended to be a
supplement to the Instruction Booklet.
In order to ensure safe operation and
optimum performance, please read the
entire Instruction Booklet.
For more helpful hints see Instruction Booklet
PG-37722-ESP© 2018 Cuisinart

Cuisinart SFP-13 SERIES Specifications

General

Brand	Cuisinart
Model	SFP-13 SERIES
Category	Food Processor
Language	English

Summary

Operation: Large Work Bowl

Position Large Work Bowl

Secure the large work bowl onto the base by turning it clockwise until locked into position.

Install Large Blade

Align the large chopping/mixing blade by its hub over the bowl center, twist, and push down to lock.

Install Disc Adapter

Lower stem adapter over the bowl center and place the disc over the adapter, using the plastic hub.

Important Operation Notes

Keep for Future Reference

Do not discard; read before operating. This guide supplements the main Instruction Booklet for safe operation.

Operation: Small Work Bowl

Position Small Work Bowl

Attach large bowl to base, insert stem adapter, place small bowl over adapter, and turn clockwise to lock.

Install Small Blade

Place small chopping/mixing blade on stem adapter and push down firmly to lock. Note: Discs cannot be used.