CUMMINS ALLISON JetScan - Strap counts and strap limits; How to set strap limits; How to clear strap counts

18
JetScan
®
STOPPING CONDITIONS
Push the front enclosure back
until it clicks into its normal
operating position.
Unhook the two plastic “T”
handles from the metal shaft
and lower them at the same time.
Replace the feeder plate. Insert
the curved edge of the feeder
plate first. Gently press down on the
feeder plate until it snaps into position.
Curved edge
Replace the hopper.
Press CONT.
Rerun all notes that were in the hopper
and both pockets at the time of the jam.
4
5
6
7
How to Order
To place an order in the United States,
visit store.cumminsallison.com.
To place an order outside of the United States,
contact your local Cummins Allison representative.
Cleaning Supplies
The following items are
available for purchase through
Cummins Allison
Desktop-Currency-Equipment Cleaning Kit
(Part Number: 406-1000-01.)
The kit contains:
• Two stick erasers
• 20 microfiber towels
• 50 Simple Green Safety Towels
• Quick-reference guides
Items Sold Separately
• One stick eraser. (Part number: 022-1695-00.)
•
10 microfiber towels. (Part number: 022-2223-00.)
• 50 Simple Green Safety Towels. (Part number: 022-2118-00.)
• Vacuum. (Part number for standard vacuum: 022-1959-00; part
number for heavy-duty vacuum: 022-1308-00.)
Power-Adapter Cable (Part Number: 022-1962-00.)
Withthiscable,thepowercordthatisdisconnectedfromtheback
of the JetScan can be used to power the vacuum.
19
JetScan
®
CLEANING SuPPLIES