Do not use tools or metal devices to remove
jammed notes from paper path.
Use of tools or metal devices could cause machine
damage and void existing warranty.
For proper removal of jammed notes, see step 3.
Remove all notes from the
hopper and both pockets.
Remove the hopper extension,
as shown in inset.
Remove the top feeder plate,
as shown at right.
1
D I S P L A Y
JetScan has detected a jam
condition.
Raise the two plastic “T” handles
at the same time and hook them
onto the metal shaft.
Push firmly down on the left- and
right-release levers and pull the
front enclosure open for access to the
paper path.
Then either:
•Movejammednotesforward/back
by manually rotating the large,
black feed rollers.
•PressFWD on the display to move
rollers forward.
•PressREV on the display to move
rollers in reverse.
Remove all jammed notes and foreign
material.
2
3
To Next Page
Loading...
