EasyManua.ls Logo

CUMMINS ALLISON JetScan 150 User Manual

CUMMINS ALLISON JetScan 150
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
| | 1
Getting started
JetScan
®
150
Currency scanner
User guide
Question and Answer IconNeed help?

Do you have a question about the CUMMINS ALLISON JetScan 150 and is the answer not in the manual?

CUMMINS ALLISON JetScan 150 Specifications

General IconGeneral
Stacker Capacity200 notes
DisplayLCD
ConnectivityRS232
Power Supply100-240 V AC, 50/60 Hz
Speed1500 notes/minute
Counterfeit DetectionUV, MG, IR

Summary

Safety Information and Power Specifications

Environmental Operating Conditions

Specifies optimal operating temperature and humidity ranges for the currency scanner.

Compliance Acknowledgments

Details FCC compliance and regulatory certifications like UL, CUL, and CE for the device.

Service Information for Internal Fuse

Provides safety precautions for replacing internal fuses, emphasizing using the correct type and rating.

About This Guide

ECB Certification Software Version

Instructions for verifying the European Central Bank (ECB) certification software version on the currency scanner.

Machine Diagram

Communication Port Diagram

Thickness Adjustment Dial

Upper and Lower Transport Sections

Getting Started

Powering ON/OFF

Step-by-step instructions on how to safely turn the JetScan 150 currency scanner on and off.

Touch-Panel Display: Main Screen

Main Screen Operation Keys

Explains the function of CRNCY, VERIFY, DETAIL, ADD, and END keys on the main touch panel for operation.

Operating Modes

STRGR (STRANGER) Mode

Scans for a target denomination and diverts others to the reject pocket, providing a grand total.

MIX Mode

Scans all denominations without presorting, providing a grand total for each denomination.

COUNT Mode

Counts media based on size and density, without performing document scanning.

FACE Mode

Diverts non-faced notes to the reject pocket; the first note processed determines the facing.

Strap Counts and Strap Limits

How to Set Strap Limits

Detailed instructions on setting strap limits for denominations using preset options or manual input.

Printed Reports

Batch Report Example

Provides an example of a batch report, showing denomination, unit count, and total value.

Stopping Conditions and Recovery Steps

Notes at Limit

Describes conditions where the machine stops due to pocket or strap limits being reached, requiring user action.

Daily Cleaning Procedures

Recommended Cleaning Materials

Lists essential cleaning agents and tools such as Simple Green, microfiber towels, and vacuum cleaners.

Related product manuals