CUMMINS ALLISON JetScan 150 User Manual

12 | JetScan
®
150 currency scanner | Getting started
Strap counts and strap limits
Strap limits may be set for each denomination in all operating modes, except for MIX,
MIX/FACE and MIX/ORIENT.
Denominations are itemized in the DENOM column. The LIMIT column indicates the
current strap limit. The COUNT row refers to the non-value piece count and appears in
COUNT mode only.
How to set strap limits
To set a strap limit:
To view current strap limits and counts, press STRAP on the main screen. The STRAP
SETTINGS screen is displayed (similiar to the following example).
1. Press or to scroll through the denominations. Stop on the desired denomination.
2. Enter a strap limit by doing one of the following options:
• Press LIMIT to scroll through the preset strap limits. There are six preset strap limits:
10, 25, 40, 50, 75 and 100. Stop on the desired setting.
• Use the numeric keypad to enter the strap limit or press 0 for innite. To delete one
character from the right, press .
3. Do one of the following:
• Press ALL to set all denominations at this strap limit.
• Press or to select the next desired denomination and repeat Step 2 to set the
strap limit.
4. When conguration is complete, press EXIT to return to the main screen.

CUMMINS ALLISON JetScan 150 Specifications

General

Brand	CUMMINS ALLISON
Model	JetScan 150
Category	Banknote Counter
Language	English