2 | JetScan
®
150 currency scanner | Safety information, power specications
Safety information, power specications
High voltage inside. Risk of electric shock.
Turn power OFF and unplug power cord from machine before
cleaning.
Do not attempt repairs. Repairs must be made by authorized
Cummins Allison personnel.
Use grounded plug and properly grounded outlet.
Read and understand all instructions before use.
Improper voltage levels can cause equipment malfunction,
damage electrical components, and void warranty.
Provide separate circuit serving only this device and follow listed
power requirements to ensure proper operation.
Provide power conditioning/stabilizing devices if necessary.
• Voltage operating range: 100-240V
• Frequency: 50/60 Hz
• Full load amps (FLA): 2.4A at 100V, 1A at 240V
• Electrical supply circuit: The customer must provide a single-phase, dedicated power line that meets the
machine’s power requirements. Use a properly grounded circuit breaker in compliance with applicable local
electrical code.
Environmental operating conditions
• Temperature: 60°F - 85°F (15°C - 29°C)
• Humidity: 30% to 70% (non-condensing)
Compliance acknowledgments
• FCC: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• Regulatory: UL/CUL/CE.
Service information for internal fuse
For continued protection against risk of re, replace only with
same type and rating of fuse.
Do not attempt repairs. Repairs must be made by authorized
Cummins Allison personnel.
To Next Page
Loading...
