Cuppon CSG 600 - Manual Operation Procedure

CSG 600 SLIDING GATE OPERATOR USER’S MANUAL
Rack
Left block
Right block
Screw the blocks on steel rack or nylon rack
Fig.7
Manual operation (see Fig.8)
In case of power failure use manual release key to open or close gate manually, use the
release key as follow:
⚫ Remove the cover.
⚫ Fit the supplied key in the hole.
⚫ Turn the key counterclockwise to release the clutch.
⚫ Pull the release lever.
⚫ Open and close the gate manually.
⚫ After power-restored close the release lever, then use the manual release key to
engage the clutch by turning the key clockwise and resume normal operation.
Fig.8
Release here