Need help?Do you have a question about the Current Audio AMP-2150 and is the answer not in the manual?
General| Power Output | 150W RMS per channel @ 8 Ohms, 225W RMS per channel @ 4 Ohms |
|---|---|
| Frequency Response | 20Hz - 20kHz ±0.5dB |
| Input Sensitivity | 1.2V |
| Input Impedance | 20k Ohms |
| Type | Power Amplifier |
| Signal-to-Noise Ratio | >100dB |
| Signal to noise ratio | >100dB (A-weighted) |
| Total Harmonic Distortion | <0.05% @ 1kHz |
Read instructions, heed warnings, follow all instructions, and avoid water or solvents.
Alerts for risk of electric shock from water or internal voltages.
Covers Dual Power Mode, Master Power Switch, and Multi-Stage Protection.
Specifies minimum air space for proper cooling and heat exchange.
Diagnosing and resolving no sound problems from any or specific channels.
Identifying causes and solutions for hum or buzz during operation.
To Next Page
