Why does my Current Cost EnviR Monitor show excessively high or low cost readings?
If the cost readings on your Current Cost Monitor seem excessively high or low, it's likely that the correct tariff hasn't been set. To resolve this, you should adjust your electricity price.
Why is the temperature gauge on my Current Cost EnviR reading excessively high?
If the temperature gauge on your Current Cost Monitor is excessively high, it might be because the display is too close to a heat source. Try choosing a different location for the display.
What to do if the data on my Current Cost EnviR does not change?
If the data on your Current Cost Monitor isn't changing, ensure that the clamp is placed around only one exposed cable and not a multicore cable.
Why is my Current Cost EnviR Monitor showing alternating readings?
If your Current Cost Monitor displays alternating readings, it could be picking up a signal from a neighbor's transmitter. Try pairing your transmitter and display again.
Why does my Current Cost Monitor costs reading seem too high or low?
If the costs reading on your Current Cost Monitor seems excessively high or low, it might be due to an incorrect tariff setting. To resolve this, you should adjust your electricity price.
Why is the temperature gauge on my Current Cost Monitor excessively high?
If the temperature gauge on your Current Cost Monitor is excessively high, the display might be too close to a heat source. Try choosing a different location for the display.
What to do if my Current Cost Monitor shows alternating readings?
If the Current Cost Monitor displays alternating readings, it could be picking up a signal from a neighbor's transmitter. To fix this, try pairing your transmitter and display again.
How to fix no display on Current Cost Monitor?
If there is no display on your Current Cost Monitor, it may be due to a faulty display or a problem with the display's power supply. In this case, you should contact your supplier.
What to do if my Current Cost Monitor display is corrupted?
If the display on your Current Cost Monitor is corrupted (showing incomplete data), it is likely due to a faulty display. You should contact your supplier.
Step-by-step guide to synchronize the EnviR display with the transmitter.
Explains syncing multiple transmitters for monitoring appliances or users.
Instructions to restore the EnviR to factory settings, erasing all data.
Details on transferring historical and real-time data via USB to a computer.
General| Display Type | LCD |
|---|---|
| Communication | Wireless |
| Data Logging | Yes |
| Type | Energy Monitor |
| Wireless Range | Up to 30 meters |
| Data Export | Via USB |
| Accuracy | 1% |
| Update Rate | 6 seconds |
| Battery Life | Not applicable |
| Power Source | Mains powered with battery backup |
| Measurement Range | 0 to 9999 W |
To Next Page